Kategóriák
Termék részletek


UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással

Raktárkészlet: VAN
UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
  • UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
  • UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
  • UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
  • UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
  • UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
  • UPS HAT Raspberry Pi számítógéphez 21700 akkumulátor támogatással
11 016 Ft + 27% ÁFA | Bruttó:13 990 Ft
Értesítést kérek árcsökkenés esetén
  • UPS HAT (D) for Raspberry Pi, Supports 21700 Li battery (NOT included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging And Power Output At The Same Time
    Uninterruptible Power Supply for Raspberry Pi

    Supports charging and power output at the same time, with dynamic path management, stable 5V output

    Comes with online development resources and manual

    SAFETY CAUTIONS

    • Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
    • Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
    • Do not mix use old batteries with new ones, avoid using batteries of different brands.
    • When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
    • Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
    • Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
    Features at a glance

    TheUPS HAT (D) is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard switching Li battery charging chip with path management, boost converter chip, and voltage/current monitoring chip which can monitor the operating state of the batteries via the I2C interface.

    • Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
    • Onboard Li battery charging chip, with dynamic path management, more stable power supply
    • Onboard boost converter chip for stable 5V power output
    • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
    • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
    • Onboard MCU management, supports detecting power connection and booting the Raspberry Pi
    • Supports displaying battery level on the system, easy to check the battery remaining capacity
    • Onboard LED indicators for monitoring the battery operating status
    • Comes with online development resources and manual
    Specifications
    Output voltage 5V
    Control bus I2C
    Battery support 21700 Li battery × 2 (in parallel, NOT included)
    Charger support 5V (Type-C port)
    Dimensions 56 × 85mm
    Mounting hole size 3.0mm
    Uninterruptible Power

    It is able to charge the batteries and provide power output at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble

    * for reference only, please refer to the Package Content for the detailed part list

    Dynamic Path Management, More Stable Power Supply
    • When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be disconnected after being fully charged to avoid battery life damaging caused by frequent charging and discharging
    • When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation
    • When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. And automatically switch over to batteries output if the external power supply is unavailable, keeps the system running without any trouble
    Supports 21700 large capacity Li battery, Longer Battery Life

    Onboard warning indicators, easy to check if the battery is connected correctly

    pogo pins connector

    Powering the Raspberry Pi via pogo pins, without using any GPIO resource,compatible with Raspberry Pi 3 / 3B+ / 4B, etc.

    Real time monitoring

    monitoring the batteries voltage, current, power, and remaining capacity via I2C

    When the voltage dips too low, it is possible to save files properly and then shut down the system by software, to avoid any data loss

    for reference ONLY, the Raspberry Pi and Fan HAT are NOT included.
    Supports Battery level display and detecting power connection

    Easy to check the battery status in real-time, and automatically shutdown when the battery level is low. Onboard MCU chip for detecting power connection and automatically rebooting the Raspberry Pi

    Onbaord USB interfaces

    Adopts USB Type-C interface for charging and the USB Type-A interface for 5V power output, convenient for powering other boards

    Product show
    Outline dimensions
    Resources & Services

    * Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

    Selection guide
    Model Device Support Battery Support feature
    Pico-UPS-A Raspberry Pi Pico 14500 Li-ion battery (NOT included) Provides power supply via pin header
    Pico-UPS-B 600mAh 3.7V Li-po battery Provides power supply via pin header
    UPS HAT (C) Raspberry Pi Zero 803040 Li-po battery 1000mAh 3.7V Provides power supply via Pogo pins
    Li-ion Battery HAT 14500 Li-ion battery (NOT included) UPS not supported
    UPS HAT (B) Raspberry Pi 5/4B/3B+ 18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery charger Provides power supply via Pogo pins, with 5V USB output
    UPS HAT (E) 21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C port Provides power supply via Pogo pins, with 5V USB output
    UPS HAT Raspberry Pi 4B/3B+ 18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery charger Provides power supply via pin header, with 5V USB output
    UPS HAT (D) 21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery charger Provides power supply via Pogo pins, with 5V USB output
    Li-polymer Battery HAT 3.7V 3000mAh 104060 Li-polymer battery, up to 2A output current Provides power supply via pin header, UPS not supported
    UPS Power Module Jetson Nano 18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery charger Provides power supply via 6PIN cable, with OLED screen
    UPS Power Module (B) 18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery charger Provides power supply via Pogo pins
    UPS Power Module (C) Jetson Orin Nano Jetson Orin NX 21700 Li battery × 3 (in series, NOT included), the output voltage is same as the input voltage when there is power input or equals the battery voltage (9V~12.6V) when there is no power input, supports 15V~19V input input voltage Provides power supply via Pogo pins
    UPS Module 3S Suitable for the devices with Type-C power port 18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery charger Adapting various interfaces via cables
    UPS Module Mini Suitable for CM4-IO-WIRELESS-BASE-B base board, etc. 10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A output Provides power supply via pads or pin header
  • Brand
    Waveshare
    Raktárkészlet
    VAN
    Cikkszám
    RPI-WS25567
;