Kategóriák
Termék részletek


Waveshare RP2350-Plus fejlesztőkártya, alacsony költségű, nagy teljesítményű Pico-szerű MCU-kártya Raspberry Pi RP2350A kétmagos és két architektúrájú mikrokontrollerel

ÚJ
Raktárkészlet: NINCS
Waveshare RP2350-Plus fejlesztőkártya, alacsony költségű, nagy teljesítményű Pico-szerű MCU-kártya Raspberry Pi RP2350A kétmagos és két architektúrájú mikrokontrollerel
  • Waveshare RP2350-Plus fejlesztőkártya, alacsony költségű, nagy teljesítményű Pico-szerű MCU-kártya Raspberry Pi RP2350A kétmagos és két architektúrájú mikrokontrollerel
  • Waveshare RP2350-Plus fejlesztőkártya, alacsony költségű, nagy teljesítményű Pico-szerű MCU-kártya Raspberry Pi RP2350A kétmagos és két architektúrájú mikrokontrollerel
  • Waveshare RP2350-Plus fejlesztőkártya, alacsony költségű, nagy teljesítményű Pico-szerű MCU-kártya Raspberry Pi RP2350A kétmagos és két architektúrájú mikrokontrollerel
7 079 Ft + 27% ÁFA | Bruttó:8 990 Ft
Nincs raktáron
Értesítést kérek, ha újra lesz raktáron
Waveshare RP2350-Plus fejlesztőkártya, alacsony költségű, nagy teljesítményű Pico-szerű MCU-kártya Raspberry Pi RP2350A kétmagos és két architektúrájú mikrokontrolleren
  • Waveshare RP2350-Plus Development Board, A Low-cost, High-performance Pico-like MCU Board Based On Raspberry Pi RP2350A Dual-core & Dual-architecture Microcontroller
    RP2350 MCU Board Plus

    a Pico-like MCU board based on Raspberry Pi RP2350A

    Compatible with most of the Raspberry Pi Pico add-on modules

    RP2350-Plus Mini Development Board, front view and features
    Board specifications
    • RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
    • Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz
    • 520KB of SRAM, and 4MB of on-board Flash memory
    • Type-C connector, keeps it up to date, easier to use
    • Lithium battery recharge/discharge header, suitable for mobile devices
    • Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
    • Castellated module allows soldering directly to carrier boards
    • USB 1.1 with device and host support
    • Low-power sleep and dormant modes
    • Drag-and-drop programming using mass storage over USB
    • 26 × multi-function GPIO pins
    • 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
    • Accurate clock and timer on-chip
    • Temperature sensor
    • Accelerated floating-point libraries on-chip
    • 12 × Programmable I/O (PIO) state machines for custom peripheral support
    Pinheader options
    RP2350-Plus

    RP2350-Pluswithout pinheader

    RP2350-Plus-M

    RP2350-Plus-M with pre-soldered pinheader

    C/C++, MicroPython support

    Comprehensive SDK, dev resources, tutorials to help you easily get started

    RP2350-Plus Mini Development Board, C/C++, MicroPython support
    dual-core, dual-architecture

    Adopts dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz

    RP2350-Plus Mini Development Board, dual-core, dual-architecture design
    26 × multi-function GPIO pins

    configurable pin function, allows flexible development and integration

    RP2350-Plus Mini Development Board, 29 × multi-function GPIO pins
    What's On Board
    RP2350-Plus Mini Development Board, onboard components
    1. LEDuser LED (not power indicator)
    2. USB Type-C connector
    3. ETA6096high efficiency Lithium battery recharge manager
    4. MP28164high efficiency DC-DC buck-boost chip
    5. BOOT button press it when resetting to enter download mode
    6. On-board flash memory4MB: W25Q32JVSSIQ
    7. RESET button
    1. RP2350A Dual-core and dual-architecture design, up to 150 MHz operating frequency
    2. Battery headerMX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
    3. Pinoutcompatible with Raspberry Pi Pico 2
    4. USB test pointsconnecting to USB interface
    5. BOOT test point connecting to BOOT button
    6. DEBUG points
    outline dimensions
    RP2350-Plus Mini Development Board, outline dimensions
    Resources & Services
    Pico Product Selection
    PRODUCTVoltage regulator chipUSBFlashLithium battery headerOnboard LCD
    RP2350 chip
    Raspberry Pi Pico 2DC-DC, 800mAMicro USB4MB--
    Raspberry Pi Pico 2 WDC-DC, 800mAMicro USB4MB-with WIFI and Bluetooth
    Type-A ver.LDO, 500mAType-A4MB--
    Type-C ver.LDO, 800mAType-C4MB--
    Tiny ver.LDO, 800mASeparate Type-C port adapter4MB-Separate adapter board design, adapting USB Type-C port via FPC
    ETH Port ver.LDO, 800mAType-C4MB-with Ethernet port
    1.28inch Round LCD ver.LDO, 300mAType-C4MBSupport(allows recharging the battery and powering the board at the same time)1.28inch IPS LCD
    1.28inch Round Touch LCD ver.LDO, 300mAType-C16MBSupport(allows recharging the battery and powering the board at the same time)1.28inch IPS touch LCD
    0.96 LCD ver.DC-DC, 2000mAType-C4MBSupport(allows recharging the battery and powering the board at the same time)0.96inch IPS LCD
    Plus ver.DC-DC, 2000mAType-C4MBSupport(allows recharging the battery and powering the board at the same time)-
    RP2040 chip
    Raspberry Pi Pico WDC-DC, 3000mAMicro USB2MB-with WIFI
    Raspberry Pi Pico WHDC-DC, 3000mAMicro USB2MB-with WIFI
    Raspberry Pi PicoDC-DC, 800mAMicro USB2MB--
    Raspberry Pi Pico HDC-DC, 800mAMicro USB2MB--
    Type-A ver.LDO, 500mAType-A4MB--
    Mini ver.LDO, 800mAType-C2MB--
    Tiny ver.LDO, 500mASeparate Type-C port adapter2MB-Separate adapter board design, adapting USB Type-C port via FPC
    RGB Matrix ver.LDO, 500mAType-C2MB-Onboard 5×5 RGB LED matrix
    BLE ver.LDO, 300mASeparate Type-C port adapter2MB-Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC
    ETH Port ver.LDO, 500mAType-C4MB-with Ethernet port
    0.99inch Round LCD with case ver.LDO, 500mAType-C2MB-0.99inch IPS LCD, CNC metal case
    1.28inch Round LCD ver.LDO, 300mAType-C2MBSupport(allows recharging the battery and powering the board at the same time)1.28inch IPS LCD
    1.28inch Round LCD with case ver.LDO, 300mAType-C2MBSupport(allows recharging the battery and powering the board at the same time)1.28inch IPS LCD, CNC metal case
    1.28inch Round Touch LCD ver.LDO, 500mAType-C16MBSupport(allows recharging the battery and powering the board at the same time)1.28inch Touch LCD
    1.28inch Round Touch LCD with case ver.LDO, 500mAType-C16MBSupport(allows recharging the battery and powering the board at the same time)1.28inch Touch LCD, CNC metal case
    1.69inch Touch LCD ver.LDO, 500mAType-C16MBSupport(allows recharging the battery and powering the board at the same time)1.69inch Touch LCD
    0.96 LCD ver.DC-DC, 1800mAType-C2MBSupport(allows recharging the battery and powering the board at the same time)0.96inch IPS LCD
    Plus ver.DC-DC, 1800mAType-C4MB/16MBSupport(allows recharging the battery and powering the board at the same time)-
    DVI port ver.LDO, 300mAType-C16MBSupport(allows recharging the battery and powering the board at the same time)Onboard DVI interface, TF card slot and PIO-USB port
    Cam & LCD ver.-Type-C16MB-Onboard grayscale camera and 1.14inch IPS LCD display
  • Brand
    Waveshare
    Raktárkészlet
    NINCS
    Cikkszám
    RPI-WS29371
    Státusz
    ÚJ    
  • RP2350-Plus

    RP2350-Plus x1

    RP2350-Plus

    RP2350-Plus-M

    RP2350-Plus with pre-soldered header x1

    RP2350-Plus-M
;