Kategóriák
Termék részletek
Főkategória >Waveshare
 
 

UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS

ÚJ
Raktárkészlet: VAN
UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS
  • UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS
  • UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS
  • UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS
  • UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS
  • UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat, Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó, Raspberry Pi UPS
20 041 Ft + 27% ÁFA | Bruttó:25 452 Ft
db Kosárba Kosárba
Értesítést kérek árcsökkenés esetén
UPS HAT (E) Raspberry Pi-hez, 4 × 21700 Li akkumulátort támogat (nem tartozék), Kétirányú gyorstöltés, 5V 6A kimenet, Pogo Pins csatlakozó
Részletek Adatok Csomag tartalma
  • UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector
    Uninterruptible Power Supply for Raspberry Pi

    Type-C Bi-Directional Fast charging, 5V 6A output.Supports charging and power output at the same time, onboard battery fuel gauge IC

    Comes with online development resources and manualUPS HAT (E) for Raspberry Pi, front view

    SAFETY CAUTIONS

    • Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
    • Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
    • Do not mix use old batteries with new ones, avoid using batteries of different brands.
    • When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
    • Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
    • Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
    Features at a glance

    TheUPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.

    • Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+
    • Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power
    • Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters.
    • Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time
    • Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life
    • Onboard high-power buck chip for stable 5V 6A power output
    • Onboard MCU management, supports detecting power connection and booting the Raspberry Pi
    • Supports displaying battery level on the system, easy to check the operating state of the HAT
    • Comes with online development resources and manual
    Specifications
    Control busI2C
    Battery support21700 Li battery × 4 (in series, NOT included)
    Type-C powerBi-directional input/output fast charging protocol, up to 40W charging power
    Output power5V 6A
    Dimensions56 × 88mm
    Mounting hole size3.0mm
    Uninterruptible Power

    It is able to charge the batteries and provide power output at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble

    * for reference only, please refer to the Package Content for the detailed part list

    Supports 21700 large capacity Li battery, Longer Battery Life

    Onboard warning indicators, easy to check if the battery is connected correctly

    UPS HAT (E) for Raspberry Pi, onboard warning indicators

    * for reference only, the 21700 batteries are NOT includedDo not connect the recharger if the indicator lights up, otherwise the protection circuit will be broken down.

    Onbaord USB interfaces

    Adopts USB Type-C interface, supports multiple input/output protocols. Supports 5V, 9V, 12V, 15V, 20V input voltage, up to 40W charging power. Onboard USB Type-A interface for 5V power output, more convenient for powering other boards

    UPS HAT (E) for Raspberry Pi, onboard USB interfaces

    * for reference only, the Raspberry Pi 5 Official 27W USB-C power supply is NOT included.

    pogo pins connector

    Powering the Raspberry Pi via pogo pins, without using any GPIO resource,compatible with Raspberry Pi 5 / 4B / 3B+, etc.

    UPS HAT (E) for Raspberry Pi, onboard components
    UPS HAT (E) for Raspberry Pi, connecting to Raspberry Pi 5

    Connecting to Raspberry Pi 5

    UPS HAT (E) for Raspberry Pi, connecting to Raspberry Pi 4B

    Connecting to Raspberry Pi 4B

    * for reference only, the 21700 batteries are NOT included

    Real time monitoring

    monitoring the Type-C port and batteries voltage, current, power, and remaining capacity via I2C

    When the voltage dips too low, it is possible to save files properly and then shut down the system by software, to avoid any data loss

    UPS HAT (E) for Raspberry Pi, supports real time monitoring
    Supports Battery level display and detecting power connection

    Easy to check the battery status in real-time, and automatically shutdown when the battery level is low. Supports detecting power connection and automatically rebooting the Raspberry Pi

    UPS HAT (E) for Raspberry Pi, supports checking the battery status in real-time
    Outline dimensions
    UPS HAT (E) for Raspberry Pi, outline dimensions
    Resources & Services
    WIKI:www.waveshare.com/wiki/UPS_HAT_(E)

    * Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

    Selection guide
    ModelDevice SupportBattery Supportfeature
    Pico-UPS-ARaspberry Pi Pico14500 Li-ion battery (NOT included)Provides power supply via pin header
    Pico-UPS-B600mAh 3.7V Li-po batteryProvides power supply via pin header
    UPS HAT (C)Raspberry Pi Zero803040 Li-po battery 1000mAh 3.7VProvides power supply via Pogo pins
    Li-ion Battery HAT14500 Li-ion battery (NOT included)UPS not supported
    UPS HAT (B)Raspberry Pi 5/4B/3B+18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery chargerProvides power supply via Pogo pins, with 5V USB output
    UPS HAT (E)21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C portProvides power supply via Pogo pins, with 5V USB output
    UPS HATRaspberry Pi 4B/3B+18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery chargerProvides power supply via pin header, with 5V USB output
    UPS HAT (D)21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery chargerProvides power supply via Pogo pins, with 5V USB output
    Li-polymer Battery HAT3.7V 3000mAh 104060 Li-polymer battery, up to 2A output currentProvides power supply via pin header, UPS not supported
    UPS Power ModuleJetson Nano18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery chargerProvides power supply via 6PIN cable, with OLED screen
    UPS Power Module (B)18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery chargerProvides power supply via Pogo pins
    UPS Power Module (C)Jetson Orin Nano Jetson Orin NX21700 Li battery × 3 (in series, NOT included), the output voltage is same as the input voltage when there is power input or equals the battery voltage (9V~12.6V) when there is no power input, supports 15V~19V input input voltageProvides power supply via Pogo pins
    UPS Module 3SSuitable for the devices with Type-C power port18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery chargerAdapting various interfaces via cables
    UPS Module MiniSuitable for CM4-IO-WIRELESS-BASE-B base board, etc.10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A outputProvides power supply via pads or pin header
  • Brand
    Waveshare
    Raktárkészlet
    VAN
    Cikkszám
    RPI-WS27966
    Státusz
    ÚJ    
  • The 21700 batteries are NOT included
    1. UPS HAT (E) x1
    2. Acrylic protection panel x1
    3. Screws pack x1
    1UPS HAT (E)
    2
    3
:
;
Adatkezelési beállítások